|
 Rank: Semi-Pro Level 1 Groups: Registered
Joined: 25/07/2011 Posts: 59 Points: 50 Location: Oxford
|
Hi happy band of bilder's how's things with your Surprise.I was hoping to say that i was getting on with my build,but unfortunatly i cannot.Started to put the deck plates on Wednesday,but that came to a crunching halt as nothing lined up,the deck plate cutouts didn't line up with the ribs,or the mast holes,can't believe the run of bad luck i'm having,hope there's a happy ending to this sorry saga.hope Admin read this.Bye gang,be back later with some good news i hope.Phil
|
|
 Rank: Pro   Groups: Registered
Joined: 05/12/2011 Posts: 133 Points: 270 Location: wick scotland
|
builderphil wrote:Hi happy band of bilder's how's things with your Surprise.I was hoping to say that i was getting on with my build,but unfortunatly i cannot.Started to put the deck plates on Wednesday,but that came to a crunching halt as nothing lined up,the deck plate cutouts didn't line up with the ribs,or the mast holes,can't believe the run of bad luck i'm having,hope there's a happy ending to this sorry saga.hope Admin read this.Bye gang,be back later with some good news i hope.Phil sorry to here at hope you get it sorted mate building the spitfire,RMS Titanic hachette and now starting the u-96 submarine
|
|
 Rank: Semi-Pro Level 1 Groups: Registered
Joined: 25/07/2011 Posts: 59 Points: 50 Location: Oxford
|
Thanks Bilboa,will keep you all up to date.Phil
|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
builderphil wrote:Hi happy band of bilder's how's things with your Surprise.I was hoping to say that i was getting on with my build,but unfortunatly i cannot.Started to put the deck plates on Wednesday,but that came to a crunching halt as nothing lined up,the deck plate cutouts didn't line up with the ribs,or the mast holes,can't believe the run of bad luck i'm having,hope there's a happy ending to this sorry saga.hope Admin read this.Bye gang,be back later with some good news i hope.Phil Hi Phil, Can you post some photos of your build and memeber might be able to assist, I don't seem to recall Magpie1812 having such problems?
|
|
 Rank: Pro   Groups: Registered
Joined: 05/12/2011 Posts: 133 Points: 270 Location: wick scotland
|
Tomick wrote:builderphil wrote:Hi happy band of bilder's how's things with your Surprise.I was hoping to say that i was getting on with my build,but unfortunatly i cannot.Started to put the deck plates on Wednesday,but that came to a crunching halt as nothing lined up,the deck plate cutouts didn't line up with the ribs,or the mast holes,can't believe the run of bad luck i'm having,hope there's a happy ending to this sorry saga.hope Admin read this.Bye gang,be back later with some good news i hope.Phil Hi Phil, Can you post some photos of your build and memeber might be able to assist, I don't seem to recall Magpie1812 having such problems? Iamm about to start mine soon hope I don't get at problem building the spitfire,RMS Titanic hachette and now starting the u-96 submarine
|
|
 Rank: Semi-Pro Level 1 Groups: Registered
Joined: 25/07/2011 Posts: 59 Points: 50 Location: Oxford
|
Hi fellow shipmates,i had adelivery today containing the deck plates for the Surprise,and they fit 1st time,just had to trim about 2mm of the aft part of the stern decking but apart from that all went well,the only thing i didn't get were the nails,got some of my own,now the question is,what is the best way to put a nail close to the rib to hold the deck on the curve of the ribs,it could be that my pins are to long at 7mm,ant answeres greatfully received.Thanks,Phil
|
|
|
Hi Phil,
Best way is mark and centre line of each cutout, lay the front section of the deck in place, then pin in place from front to back a rib at a time always checking the centre line. 7mm pins are no problem mate.
Check on my build which way I have done it. http://forum.model-space...s&m=11517#post11517
Chris.On the bench 1/350 Revell Tirpitz Platinum Edition (Pontos PE and Wooden deck) plus extra Eduard PE set and extra MK1 door sets.
|
|
 Rank: Semi-Pro Level 1 Groups: Registered
Joined: 25/07/2011 Posts: 59 Points: 50 Location: Oxford
|
Hi Chris,thanks for that advice will do that.Phil
|
|
Guest
|