|
 Rank: Pro    Groups: Registered
Joined: 25/01/2010 Posts: 459 Points: 1,367 Location: Bridlington
|
 Has ANY of my fellow Builders, Received the Full Size Plans FOR the Masts And Rigging???. I have JUST sent ANOTHER EMAIL TO DeAG. I WILL HAVE THEM UNDER THE SALE OF GOODS ACT. for pats I have paid for and for The LABOURE I have put into the Build I Kidd You NOT. lol Regards
Rob
Bridlington.
Built Flying Scotsman (Train). Collecting HMS VICTORY
|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Have you PM'd Admin via the advice at post #19 of this topic?http://forum.model-space....aspx?g=posts&t=3610
|
|
 Rank: Pro    Groups: Registered
Joined: 25/01/2010 Posts: 459 Points: 1,367 Location: Bridlington
|
Hi Tomic EVERY TIME I try to PM Admin I can not get through lol. Regards
Rob
Bridlington.
Built Flying Scotsman (Train). Collecting HMS VICTORY
|
|
 Rank: Pro    Groups: Registered
Joined: 25/01/2010 Posts: 459 Points: 1,367 Location: Bridlington
|
[quote=Tomick] Have you PM'd Admin via the advice at post #19 of this topic?http://forum.model-space...aspx?g=posts&t=3610[/quote] Hi Tomick, I think I got Through, Cheers .Rob. Regards
Rob
Bridlington.
Built Flying Scotsman (Train). Collecting HMS VICTORY
|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Good stuff, though PM me if you don't get sorted
|
|
 Rank: Vice-Master    Groups: Registered
Joined: 09/02/2012 Posts: 569 Points: 1,675 Location: Scotland
|
. I received the drawings on disc, I took the disc to my copiers and asked them to print of at a scale of 1 : 1. Alas the biggest they could print of was on to size A 0, at this size the drawings was not quite 1 : 1. I tried another copy shop and got the same advice, I sent admin a P M telling them of my plight, and asked if they could help, they sent me a paper copy of the drawings, but alas there drawing was bigger than 1 : 1. Surly if my drawing was smaller than 1 : 1 and there's was bigger than 1 : 1. Taken from the same drawing file, there must be a way of getting it to 1 : 1. Any advice would be greatly appreciated,
Mo
,Mo
|
|
 Rank: Pro    Groups: Registered
Joined: 25/01/2010 Posts: 459 Points: 1,367 Location: Bridlington
|
Hi all Just to let you know, after my PM to admin YESTERDAY, this morning I received TWO Disc's and a 1:1 scale plan of the Mast plans. But NO Rigging plans, so I Printed the Rigging plans of as a POSTER, Just got stick them ALL together lol  or Maybe the Good wife. Regards
Rob
Bridlington.
Built Flying Scotsman (Train). Collecting HMS VICTORY
|
|
 Rank: Pro  Groups: Registered
Joined: 17/03/2010 Posts: 301 Points: 941 Location: fife
|
great to hear the plans are available, maybe i will now seriously consider the surprise as my next project. current builds
victory,endeavour,thermoplye,constitution
|
|
 Rank: Pro    Groups: Registered
Joined: 25/01/2010 Posts: 459 Points: 1,367 Location: Bridlington
|
I just measured the lower main mast on the plan at the side of the mast the measurement says 435mm, but when I put a steel rule against the mast the rule says 472mm?. so it's NOT to scale the the print is to big, not that it matters only need it as a guide. It's just yet another example of, well. Regards
Rob
Bridlington.
Built Flying Scotsman (Train). Collecting HMS VICTORY
|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
As long as you have the measurements indicated, then it shouldn't pose a problem.
|
|
 Rank: Vice-Master    Groups: Registered
Joined: 09/02/2012 Posts: 569 Points: 1,675 Location: Scotland
|
I have taken my undersized drawing to another copy shop, (50 miles away) and they blew the drawing up to about 112 % or there abouts, I want to be able to put the masts and yards against the scale 1 : 1 drawing to ensure that all the blocks etc are in the right place, my yards are marked for length, but they do not indicate the distance to the blocks etc. In my eyes a lot easier now, but a lot of work trying to achieve it.
MoMo
|
|
Guest
|