Welcome Guest Search | Active Topics | Log In | Register

fifth plank Options
benny b
#1 Posted : 02 January 2013 17:01:25

Rank: Pro

Groups: Registered

Joined: 05/12/2012
Posts: 258
Points: 754
Location: manchester
hi in part 18 the fifth plank is to be tapered at the bow can enyone tell me how much of a taper (width) and from how far down the plank the taper is. the assembly guide just says as shown in photo. Confused
karl1113
#2 Posted : 02 January 2013 17:06:38

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/04/2010
Posts: 3,955
Points: 11,809
Location: uk
hi benny,the norm is at the bow end taper down to half width,back to former 7,that's what I'm doing.the instructions are a bit vague.the only one I havn't tapered is the first one.
Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory
Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat.

http://www.model-space.com/gb/
Admiral Anti Spiral
#3 Posted : 02 January 2013 18:26:54

Rank: Pro

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 24/09/2012
Posts: 491
Points: 1,452
Location: London
im quite confused about how you're meant to taper them too, but what i did was taper it up to 4mm to frame 5, even then its not completely flat with the bow.
Processing - Progressing

Previous builds: HMS Victory
Current build: HMS Sovereign of the seas
karl1113
#4 Posted : 02 January 2013 19:10:31

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/04/2010
Posts: 3,955
Points: 11,809
Location: uk
hi admiral,having done other models of this shape of bow (victory and others)I have learn't to my cost that the bow planks WILL go the clinker way,i.e. bottom plank will try to overlap the plank above.to counter this you will have to taper the bow planks,when you choose to do this is up to you,why don't you have a look at son of bulwarks diary of the victory,he explains this problem and how the clinker comes about.
Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory
Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat.

http://www.model-space.com/gb/
Gandale
#5 Posted : 02 January 2013 19:19:56

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Global Forum Support, Moderator, Official Builds, Administrators

Joined: 08/09/2012
Posts: 15,172
Points: 46,151
Location: Aberdeen
karl1113 wrote:
hi admiral,having done other models of this shape of bow (victory and others)I have learn't to my cost that the bow planks WILL go the clinker way,i.e. bottom plank will try to overlap the plank above.to counter this you will have to taper the bow planks,when you choose to do this is up to you,why don't you have a look at son of bulwarks diary of the victory,he explains this problem and how the clinker comes about.


Karl, don't know if you have noticed but Son of Bulwork is no longer part of this forum, he has deleted his victory diary.... I think it is a sad loss to see him leave the forum.....

Regards

Alan
benny b
#6 Posted : 02 January 2013 19:24:21

Rank: Pro

Groups: Registered

Joined: 05/12/2012
Posts: 258
Points: 754
Location: manchester
hi thanks karl and aas i also thought it was confusing saying look at photo is not much of a guide.
karl1113
#7 Posted : 02 January 2013 20:30:57

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/04/2010
Posts: 3,955
Points: 11,809
Location: uk
sorry chaps didn't realise that sob's diary had gone,although not much help but I will put up pics tomorrow of my planking,again I fear it will not help those that are using bamboo,I'm using all my old bits of 2x5mm.wood stock,as someone on here who will remain nameless(mwg)bought up all of cornwalls stock of 2x5mm basswood of which I ordered before xmas and has not showed up yet.if the newbees would like to wait a bit they will see how the planking goes on my build.I regard this part the most important part of the build,so no need to rush.
Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory
Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat.

http://www.model-space.com/gb/
birdaj2
#8 Posted : 02 January 2013 20:55:24

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 31/05/2010
Posts: 5,679
Points: 17,011
Location: Wiltshire
Karl

Happy new year to you.

Way behind on this one as my subscription ( less than number 10) I lost due to them charging me full price for the first issues.

Set up a new sub but now get the deliveries much later than most ( lesson to be learnt - keep gob shut about being charged an extra couple of quid).

Been following the builds and interested on this bamboo change to the usual lime wood for first planking. I raised a query about MDF being used in the false keel and ribs of my victory models lady nelson and was assured no issues. Guess all companies have to offset raw materials/profit/what the end user will pay.

Mr T did respond to another member That lime wood would be ok so as soon as I get sizes of the bamboo I am planning to order the same size in lime wood (basswood ?) to do this build.

Sorry tgat SOB has gone as you guys have been my lifeline over the months - hope nothing bad has been the reason for his resignation from this site. Not a big poster of texts myself ( sausage fingers and small keys on an iPod touch not a good combination) but really do appreciate all the advice, pictures of the exceptional builds and the community spirit.

Not s big one for new years messages because in my view one awful day is very much like another - but I will say I how you get through 2013 with the least amount of issues that whatever god you support will allow.

Kind regards

Tony
Happy Modelling

BUILDING: Hachette Spitfire Mk 1A, Constructo Mayflower
SUBSCRIPTION COMPLETE (Awaiting building): USS Constitution, Sovereign of the Seas, 1:200 Bismarck (Hachette)
COMPLETED: Porsche 911, E-Type Jaguar, Lam Countach
court orchard
#9 Posted : 02 January 2013 21:52:16

Rank: Master


Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 05/09/2012
Posts: 1,400
Points: 4,690
Location: Beaminster, Dorset
Happy 2013 everybody,
As is my wont, I am being very indecisive over wether to use the supplied Bamboo or use Limewood. Having almost decided to go with the Bamboo, I have now realised that cutting all those cannon Ports out of the hard Bamboo may become something of a nightmare, at least with the sanding you can enlist a little electro-mechanical assistance. Certainly, cutting out the chain pump holes from the Bamboo hold planking on my X-section was quite hard work. In it's defence the Bamboo does finish nicely, but for the 1st planking this is not an issue.
Andy

Building:Samurai Armour, SOTS, Victory X-Section, Bismarck, D51
Finished:WW I Bavarian NCO, Caldercraft HM Bark Endeavour FFG 58 Samuel B Roberts,
marls
#10 Posted : 02 January 2013 23:08:08

Rank: Beginner Level 2

Groups: Registered

Joined: 30/09/2012
Posts: 17
Points: 33
Location: Stockton-on-Tees
So how will we know whats right or wrong?
court orchard
#11 Posted : 02 January 2013 23:32:20

Rank: Master


Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 05/09/2012
Posts: 1,400
Points: 4,690
Location: Beaminster, Dorset
marls wrote:
So how will we know whats right or wrong?


Just like most things in life there is no right or wrong, just shades of grey (50 apparentlyLOL). Clearly the model can be built as supplied as Mr T will demonstrate, but there may be ways to make things a little easier, if the answer was black or white I would've made my mind up a long time ago. The most obvious point is that changing materials will add additional cost to your build. At the end of the day it's a personal choice, based on experience, cost and time.
Andy

Building:Samurai Armour, SOTS, Victory X-Section, Bismarck, D51
Finished:WW I Bavarian NCO, Caldercraft HM Bark Endeavour FFG 58 Samuel B Roberts,
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.160 seconds.
DeAgostini