What: Aliphatic resin

Where: http://www.cornwallmodel...catalog/wood_glues.html

Why: Fast tack, strong bond between wooden parts, sand-able.

Hope that helps.

Edit: The bond is quite fearsome when cured, so do dry-fit your parts first (and pay very close attention to the build instructions - some parts (such as the hull formers on the main ship) should not be glued to the keel until later.

Also, check that your build parts are unwarped before doing any gluing.

You may now sand this thread.

hi i use evostik too but if you realise you have made a mistake after it has dried just run the hot tap and place the glued area under the tap and wiggle it gently and it will come free..i did this after 5 weeks of it being glued and had no problem