|
|
 Rank: Super-Elite        Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Hans wrote:Excellent job there Steve. The colouring is exquisite and really sets everything off. Well done. Thanks for looking in Hans  Steve
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Just a little update - Coming to the end of issue 85 now and have some missing parts, only the second time this has happened so no real complaints, called customer service and they will have a new issue on its way. The parts are the decorative arches that go above the pillar of the forcastle bulkhead wall. I have made a slight change to the instructions for this part, instead of placing all the parts onto the already planked bulkhead I have made a new one up from a template so I could do the work on the bench instead of the ship, mainly to keep it simple and i was also able to make a neater job of it. I planked a piece of card with 3mmx0.5mm strips and it was then also a simple matter to cut out one of the windows to have it open instead More to come soon. stevie_o attached the following image(s):
|
|
|
Rank: Super-Elite   Groups: Registered
Joined: 04/04/2010 Posts: 3,955 Points: 11,809 Location: uk
|
nicely done steve. Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat. http://www.model-space.com/gb/
|
|
|
 Rank: Pro  Groups: Registered
Joined: 01/04/2013 Posts: 342 Points: 1,029 Location: Essex
|
Nice neat job Steve  Regards Alan England expects that every man will do his duty.
|
|
|
|
|
Great piece of work Sparks, nicely done....  Regards Alan
|
|
|
 Rank: Vice-Master Groups: Registered
Joined: 20/10/2010 Posts: 511 Points: 1,459 Location: Loughborough
|
Nice build there Steve. Keep up the good work. Peter Builds in progress: HMS Victory.HMS Surprise.
Completed builds: Revell London Bus 1/24.
Builds to do:Sovereign of the seas, Hms Albion.
|
|
|
Rank: Super-Elite  Groups: Registered
Joined: 24/04/2010 Posts: 5,787 Points: 17,662 Location: Stafford, United Kingdom
|
Great work Steve Kind regards Mike MWG BUILD DIARIES: HMS VICTORY, SOVEREIGN OF THE SEAS, SAN FRANCISCO II, HMS HOOD, HMS ENDEAVOUR LONGBOAT, HMS VICTORY X-SECTION, 007 DB5, NISSAN GTR, CUTTY SARK, RB7, AKAGI, BARK HMS ENDEAVOUR, HUMMER H1, MITSUBISHI ZERO.
|
|
|
|
|
Nice work as Always, any thoughts on how you will tackle the arches on the roundhouses? Jase “Whenever you find yourself on the side of the majority, it is time to pause and reflect.”
-Mark Twain
|
|
|
|
|
Stunning work Stevie loving this build Rgd Martyn Building ?
Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa
Next Build ?
When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Thanks again for all the support everyone Steve
|
|
|
 Rank: Elite Groups: Unapproved
Joined: 24/05/2010 Posts: 1,761 Points: 5,351 Location: London & Greece
|
Lovely paintwork Steve. Did you use the De Ag paint kit?
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
jase wrote:Nice work as Always, any thoughts on how you will tackle the arches on the roundhouses?
Jase Hi Jase, Well I wont be using the wooden parts supplied, I know this for certain as I have completely ruined them Im thinking about something I have seen lurking in my wifes craft supplies, it's a kind of coloured foam in sheets of varying thicknesses, that's if I can find it. I remember on your build you used plastic sheet, this is also a possibility - i'll have to look for some plastic containers in the recycling bin Steve
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
z8000783 wrote:Lovely paintwork Steve. Did you use the De Ag paint kit? Hi John Thanks for the comment, yes, all paint is done with the de-ag paint set except anything painted walnut as I didn't like this colour,I used either Tamiya or oil paint instead. Steve
|
|
|
Rank: Vice-Master  Groups: Registered
Joined: 26/09/2010 Posts: 851 Points: 2,565 Location: Walsall
|
Very smart work Steve. Look forward to your progress.
Regards
Foz
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Thankyou Foz, I have now installed the roundhouses and bulkhead wall - I used thin plastic for the roundhouse decoration, the metal decorations over the pillars were missing from issue 85 so rather than make these I will wait for my replacements and install them later. Steve stevie_o attached the following image(s):
|
|
|
|
|
Superb clean work Stevie, loving the build and your diary... Regards Alan
|
|
|
Rank: Administration  Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,283 Points: 23,937 Location: East midlands
|
Hi Stevie, That`s looking really good, nice colours and lovely clean lines.  Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Thanks for looking Alan & Derek, Beakhead framework coming next, just working out a better way of doing it, more to come soon Steve
|
|
|
Rank: Super-Elite  Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Hi Steve. Looking realy superp. Look forward tio seeing more Ian Current builds.Hachettes build the bismark,HMS Victory, HMS Hood.
Finished Builds Corel HMS Victory cross section.
|
|
|
Rank: Pro  Groups: Registered
Joined: 24/02/2013 Posts: 212 Points: 632 Location: denmark
|
hi steve incredibly well done model looking forward to more news. sincerely SAMSON
|
|
|
|
Guest (9)
|
US
