That is a really nice paint job, excellent work.

Mark

2/2

I flocked the pillars like on my 1:1 GTI

I worked on carbon door card. I add a rounf frame on manual glass knob, I add a yellow stripe to close the door and a metal wire to open the door.....and finally I adde a Metal knob to regulate the mirror.
I also fitted the last rubber trim on trunk

And some pics whith bodyshell and fenders mounted

Many thanks Roy.

1/2
I quite completed the hatch

i remade the rubber trim of rear glass, and also i modified the rear license plate light bar as "Cult Society" light bar like on my 1:1 mk3
I also added some PE bolts anfd paint the license lights.

I fitted also the 5 point seat belts using the rear struts bar

I worked on airride tank system. I machined an alu tnak, i added the inlet and outlet air connection. I assed the black rubber stripes and i fixxed with yellow belts

Like one my GTI 1:1 i made the bracket for CDA of BMC.
I also fitted the oil engine radiator carbon duct.
When the front girll will be fitted i added the hose to duct the air to airbox and radiatore

Some details (some bolts and decal set taht it's coming) and engine compartment is completed.

I placed the viper cover adding a battery cut off swhitch.

I completed the roof trim and finally i placed hatch, bonnet and doors.

Next week i hope will arrive the decal set to fianally fit chassis with bodyshell

Thanks....i tries to do my best with this big model

I’m finally arrived to marriage chassis and bodyshell

Before make this, i stripped out the chrome from rear badge and I repainted them in semi matt black

I adjusted the height of door hinges to match all panel lines

I worked on tail light to match the combo color lenses of the Golf Special edition. I also flocked the inside of tail lights

I also give some detail to front radiator bar: I drilled the blankes holes and repainted in titanium gold the bonnet latch. I’ll add in the future some final PE and bolts.

Many thanks

Incompleted the inlet air system for oil cooler radiator duct. The yellow hose start from the removesd high beam light and link to radiator duct.

To fix the metal mesh i machined the lenses of high beam light. I also add the bixenon bulb on black headlight.

To reach a total dark look I black painted the mesh....i also added the PE screw for beam regulation.

I did some detail work adding some head bolts on Airbox bracker and radiator bracket, at the end i completed the last air hose inlet for airbox.

Thanks very much Andy!

I was arrived to the end of this long project that began almost 4 years ago with various stops and start.

During the week should arrive all decals (including license plate and VIN) and then I'll do the final outdoor photo set

I worked on his home case a nd I reuse some spares parts fixxed on the wall...like on my 1:1 garage of my mk3.

Amazing work as always. A great display space there too.

Thanks to everybody

I started the decal work to add on my model.

Brilliant, absolutely brilliant build, enjoyed looking through all stages. Stunning. Andy.