|
|
 Rank: Semi-Pro Level 1  Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
Thanks Alan, i have drilled the gun port 2mm holes now and using a ruler as a parallel guide i have found that the holes are going through the top of the side supports and not the gun supports that were glued on top is this ok or do i have a problem thanks
|
|
|
|
|
The 2mm hole you drill needs to sit in the centre of the gun port so when you fit the dummy guns they are central. Place cocktail sticks into the holes, this will give you an idea on how your guns will line up on that deck...
Post a couple of pics so I can see what you have done....
Regards
Alan
|
|
|
Rank: Administration       Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,040 Points: 23,199 Location: East midlands
|
Your doing a really good job, so keep up the good work.  Congrats on your "Blue" medal for running a diary.  Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
hi here is a quick update of my progress, i have got to the stage of starting the lower planking,only concearn i have at the moment and its not really a problem, is that i am worried about my template for the rear gallery. I cut it out from the book so i dont doubt it accuracy but when transferred to my model i have doubts about lining it up correctly. i have studied photos and the video build, so my plan is to not cut it back until it comes to fitting the gallery. anyway here are some pics of my progress so far. oh the gun ports are a bit messy im not really happy with them but after the linings are fitted im sure it will tidy them up. cheers pfcdre attached the following image(s):
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
Hi Delboy thankyou for the diary medal and the comment, i certainly dont compare to the amazing clean builds i see here from other members but as a first serious attempt im quite happy with the progress, i still have my Hermione that needs planking but i will do victory first as it should give me some understanding. best regards
|
|
|
 Rank: Pro Groups: Registered
Joined: 30/11/2017 Posts: 493 Points: 1,482 Location: South Norfolk
|
Hi Pfcdre, I wouldn’t worry too much about the gallery template. I say this from my own experience. I had the same concern, try to align it always in the right position/angle. Then when the gallery side and rear walls were fitted later on, I realized that the planks need to be cut back quite a lot (3-4 cm) at the top (approx 5-6 top planks at your photos) and the middle section (8-10 shorter planks below the long ones) will be covered by the gallery side walls. So don’t worry if you don’t follow the template precisely. Happy building! Laszlo Finished builds: HMS Victory, HMS Victory Cross-Section
|
|
|
|
|
All looking good to me Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
 Rank: Master   Groups: Registered
Joined: 20/09/2011 Posts: 1,312 Points: 4,126 Location: Austria
|
Looking good so far!Greetings,
Walter
Present builds:
Revell B-24D Liberator 1:48
On the shelf:
Italeri "Fiat Mefistofele", Italeri "Moto Guzzi California", Fokker "Red Baron", Revell Bismarck, Revell Tirpitz, Arab Dow, Stage Coach, .....
Completed builds:
McLaren MP4/4, D-51 Steam Locomotive, HMS Victory, GWH F-15D Eagle, St. Stephen`s Cathedral (cardboard), Solar-powered paddle Steamer (little project with my son), HMS Victory X-section, "Geli" Phantom II (cardboard)
|
|
|
|
|
She's coming along very nicely. Don't see any problems with you leaving the stern planks slightly longer for trimming back later in the build..... Regards Alan
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
thanks guys means a lot coming from experienced builders such as yourselves, i seem to be overcoming problems that prevented me from finishing a previous attempt ie Mantua Golden Star, the support on here and the detailed instructions both written and video are really helping to develop the skills required to tackle other models which is great, i have the stern planks to do next. i will post pics as soon as i complete this step. Thanks again for the support and encouragement. All the best
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
Hi guys just an update, i know its been sometime since my last post! but i did not give up, i am incredibly chuffed to say i finished the hull planking at last. i must admit i had quite a few months off and due to lockdown i got back to it. so i am at the poit of marking the gun port hatch positions but notice the rear rope points dont reach the wale above, i see on the video they are marked under the wale, so is this correct, i extended mine to fit the wale but i have only marked and not drilled yet, here are some pics of my progress.cheers pfcdre attached the following image(s):
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 10/03/2016 Posts: 72 Points: 219 Location: ASHFORD KENT
|
Welcome lads you will find this site a great help during your build ,I am slowly progressing with mine (issue 75 currently) . Lots of friendly people so never be afraid to ask anything ....
|
|
|
Rank: Master Groups: Registered
Joined: 21/04/2011 Posts: 1,044 Points: 3,161 Location: Buckinghamshire
|
Hi of Dre (dooryard, don’t know your name),
Welcome back after quite a break there!
Looks like you are making a very nice job of your build.
Hope to see more progress photos.
Chris
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
goddo wrote:Hi of Dre (dooryard, don’t know your name),
Welcome back after quite a break there!
Looks like you are making a very nice job of your build.
Hope to see more progress photos.
Chris Hi Chris. My names Andre. i am now at the point where i need to plank the deck, but i have not drilled the holes for the gun hatch ropes, i marked them but i am not happy with the positions. if anyone has any input on this it would help. Am i right in assuming if you use the top holes on template then it should be the same for the entire row of gun hatches? i have marked so many positions now for each port that its become a confusing mess!
|
|
|
Rank: Master Groups: Registered
Joined: 21/04/2011 Posts: 1,044 Points: 3,161 Location: Buckinghamshire
|
pfcdre wrote:goddo wrote:Hi of Dre (dooryard, don’t know your name),
Welcome back after quite a break there!
Looks like you are making a very nice job of your build.
Hope to see more progress photos.
Chris Hi Chris. My names Andre. i am now at the point where i need to plank the deck, but i have not drilled the holes for the gun hatch ropes, i marked them but i am not happy with the positions. if anyone has any input on this it would help. Am i right in assuming if you use the top holes on template then it should be the same for the entire row of gun hatches? i have marked so many positions now for each port that its become a confusing mess! Hi Andre, I just want to say that spell checker certainly made a total mess of my message to you!! My apologies. As far as the top holes to the gun ports is concerned, I have found the same as you and gone ahead and drilled the holes using the template. It's the distance above the gun port that matters. Chris.
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
Hi Chris thanks for the info, i will drill the holes later i think, i have completed the Grates now and are fitted and done the bulkhead linings ready for the gun tackle to be fitted, the guns are ready for drilling, im just waiting for a small cordless dremel type tool to arrive so i can drill the holes in the guns.
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
So here are a few pics of progress so far. pfcdre attached the following image(s):
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
as i will be painting my vic should i have painted the Grates? it gave no indication in the instructions.
|
|
|
Rank: Master Groups: Registered
Joined: 21/04/2011 Posts: 1,044 Points: 3,161 Location: Buckinghamshire
|
All looking good for me.
Nice clean lines.
Chris
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/05/2018 Posts: 69 Points: 210 Location: portsmouth
|
Little update on my build so far. I have done the poop deck and bulkhead supports. I now have some ladders to build and soon on to the bulk head caps. At what point should I consider painting the hull?I would think fairly soon.
|
|
|
|
Guest
|
US
