Welcome Guest Search | Active Topics | Log In | Register

Pack 8 Stage 42 andPack 12 Stage 66 Options
Leslie Dean Strahm
#1 Posted : 02 March 2018 20:33:44

Rank: Beginner Level 2


Groups: Registered

Joined: 06/08/2014
Posts: 11
Points: 33
Location: California
Each of these stages show different measurements on the tie rods for the rear suspension. Stage 42 says 2.5 mm and Stage 66 says 5.70 mm. This will not work I think. Am I missing something? I have reviewed 3 times and it seems that they should be the same or does the longer go on which side?
Thanks
Les Strahmn
arpurchase
#2 Posted : 02 March 2018 21:03:59

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 27/09/2011
Posts: 15,196
Points: 45,687
Location: Dudley
Hi Leslie

It was a typo and should say the correct measurement of 2.5mm.

As you know the two long and one short tie rods are made up in stage 42 with measurements of 66.1mm for the long rods and 2.5mm for the short rod, so the last tie rod in stage 66 is a short one with the 2.5mm measurement.


Andy
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

Leslie Dean Strahm
#3 Posted : 03 March 2018 02:39:42

Rank: Beginner Level 2


Groups: Registered

Joined: 06/08/2014
Posts: 11
Points: 33
Location: California
Thanks so much, and onward!
Leslie Dean Strahm
#4 Posted : 05 March 2018 02:08:08

Rank: Beginner Level 2


Groups: Registered

Joined: 06/08/2014
Posts: 11
Points: 33
Location: California
It seems as I get closer, more questions regarding the directions.
Also. in Pack 67 the servo horn, throttle/brake has 2 holes as well as the steering servo. The picture shows 3 holes. Page 282, picture 5. There is not room for thelinkage rods to be mounted. I also require the 3 hole servo horn to continue. This is the 3rd such incident of wrong info in the directions/video requiring contact Model Space. Up to now as has been well.

Thanks and let me know any more info you require.
Metal Mech
#5 Posted : 05 March 2018 05:52:56

Rank: Master

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 07/07/2015
Posts: 1,292
Points: 3,928
Location: Allentown PA
I got your PMs and I will be contacting them tomorrow to sort you out.

DeAgostini kit builds:

Millennium Falcon: 18% Complete
Shelby GT-500: 28% Complete
Thunderbird 2: 13.75% Complete
arpurchase
#6 Posted : 05 March 2018 09:12:12

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 27/09/2011
Posts: 15,196
Points: 45,687
Location: Dudley
Hi Leslie

I think you have inadvertently been supplied with two steering servos [ stage 43 ] with the two hole horn and not the motor servo from stage 51 that has the 3 hole horn. Contact C/S for a replacement stage 51 to get the correct part.

Andy
Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .

Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.178 seconds.
DeAgostini