|
|
 Rank: Newbie Groups: Registered
Joined: 05/12/2018 Posts: 1 Points: 3
|
Hi
I have now Finished part 3 and have attached the Wheels to the underbody I seem to have a lot of sideways movement on the one of the wheels it appears that the main screw which fixes the wheel to the hub is too long and is stoping before the wheel is tight as anyone else had this problem
|
|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,478 Points: 13,591 Location: ipswich
|
Mine was ok but a simple fix is to cut the screw a fraction shorter.
Hold the screw by the end you want to cut off, in a good pair of pliers. Cut the screw with a fine razor saw.
Another way - hold the screw by the head in a pair of pliers and file the screw shorter.
|
|
|
|
|
Hi, I didn't have a problem with the wheels but will look into it for you. Chris On the bench 1/350 Revell Tirpitz Platinum Edition (Pontos PE and Wooden deck) plus extra Eduard PE set and extra MK1 door sets.
|
|
|
Rank: Super-Elite  Groups: Registered
Joined: 19/06/2013 Posts: 4,588 Points: 13,553 Location: West Yorkshire
|
Not had an issue with mine either  Al
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,478 Points: 13,591 Location: ipswich
|
Maybe the locating hole as some paint build up in it?
Try taking the wheel off and either re-tap the hole, or if you have no taps, a dot of washing up liquid and put the screw back with a constant in-out motion until it goes as deep as possible.
Then re-fit the wheel.
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
