Welcome Guest Search | Active Topics | Log In | Register

Articulated C3PO nearly fullsize with electronics Options
Previous Topic · Next Topic
Andreas
#1 Posted : 21 December 2021 17:10:19

Rank: Pro

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: registriert

Joined: 13/03/2012
Posts: 306
Points: 847
Location: Germany
Time to try something new. Here I would like to go into more depth again. It's about a diorama with an articulated C3PO. I would like to provide this fellow with sound and light completely through Arduino. I will accommodate the entire control system in the base that is currently being printed. With the printing of the Body parts I started in the order Base, then legs and then go further to the top. In total, the C3PO consists of 63 individual parts.Several joints to make him "moveable". In the end, he will have a stately size of 100cm. I scaled C3PO a little bit, cable ducts were inserted, so that I can better run the lines later. With the scaling, C3PO now nearly fits to my R2D2. There is still a long way to go, the base needs about 20 hours, the two legs took me 18 hours. And we don't need to talk about the rest. So far some ornaments have been printed,like the back panel lower, both legs, both upper arms and upper/down hip joints. Both hands are currently in "work" by been printing.All the invisible components are going to be printed in black to save gold filament.The upper body is gonna be my Job tomorrow,and which would take about 21 hours until it is finished.Following up then would be Shoulders, Head ,eyes etc,etc. Adjusted just a few Pics to show up what it currently looks like































Forum Support Team
http://www.model-space.com/de/
Back to top
WWW  Report Abusive | Report SPAM
mwb
#2 Posted : 21 December 2021 22:49:23

Rank: Pro

Groups: Registered

Joined: 22/02/2014
Posts: 182
Points: 532
Location: Big T
ThumpUp You are awesome! Andreas!!ThumpUp
Back to top
 Report Abusive | Report SPAM
Markwarren
#3 Posted : 22 December 2021 09:16:03

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,514
Points: 19,859
Location: Northamptonshire, England
Wow, that is some printing going on there. Can’t wait to see what it looks like when finished. Great stuff Andreas.Love Love
Back to top
 Report Abusive | Report SPAM
Andreas
#4 Posted : 22 December 2021 12:54:56

Rank: Pro

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: registriert

Joined: 13/03/2012
Posts: 306
Points: 847
Location: Germany
Hi Mark,
yes a lot of gold!BigGrin But I have printed out some details in copper. Especially the rivets for the joints on the arms and legs. The Big Black Joints for the head and hips won't be visible, so I took black. Forearms and upper arms are finished and connected with the hands. Everything is movable, hands can be turned in any direction, as can the upper and lower arm. I cleared the cable ducts for the electrical lines. The first lines are laid through the first leg. Now I have to wait until the hips / knees have finished printing. This is currently being printed since 11 a.m. this morning and should be ready tomorrow morning at 11 a.m. Then it goes to the upper body. These are the parts that I need the most for the electronics. Head with eyes come later, and shouldn't hinder me any further for now.






























This is the Hip and Knees Part Print Job takes 21 Hours. Gonna be done tomorrow Morning at about 11:00 am.




Forum Support Team
http://www.model-space.com/de/
Back to top
WWW  Report Abusive | Report SPAM
admin
#5 Posted : 23 December 2021 07:22:13
Rank: Administration


Groups: Administrator, Administrators, Forum Support Team, Global Forum Support, Global Forum Support Team, Moderator, Official Builds

Joined: 24/08/2009
Posts: 1,928
Points: 5,796
Location: UK
Andreas, that is pretty dang cool!

There is a guy on one of the FB Star Wars printing groups who is as scrawny as Anthony Daniel’s, who is printing the full suit.

I couldn’t get a FDM printer to run, even to to save my life.

Stay well,

Mark
Back to top
 Report Abusive | Report SPAM
Andreas
#6 Posted : 23 December 2021 17:19:25

Rank: Pro

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: registriert

Joined: 13/03/2012
Posts: 306
Points: 847
Location: Germany
Hi Mark, why don't you get a printer going, it's not rocket science. I'm sure Diana can.BigGrin

Yes to the groups, I am also in some of them on the way. At the moment I am filled with printing orders. Requests from all different groups. I'm upgrading now too. Printers are no longer sufficient. I'll get two more in January. Today my 3D scanner was delivered with an electric turntable. Should do some of my work for me. It takes time when an STL file is created. With the C3PO I also had to change something so that the cable ducts come in without endangering the stability. My 21 hour print is also finished, currently I am printing the front and back of the upper body. These don't take that long. In any case, the scale fits to the R2D2.

But now it's Christmas first, and I wish you, Diana and the whole family a Merry Christmas and stay healthy

best Andreas




















Forum Support Team
http://www.model-space.com/de/
Back to top
WWW  Report Abusive | Report SPAM
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.196 seconds.
DeAgostini