|
|
Rank: Administration        Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,450 Points: 24,441 Location: East midlands
|
Hi All, 
Here we are at the start of a new pack. This pack covers Issues 81 - 86.
In Issue 81 we start to build ET`s body framework, starting with the left shoulder.
Parts supplied.....Pic 1, you will also need ET on his stand from the last update.
Handling the contactless sensor 81-02 carefully, plug the cable 81-03 into it as in Pic 2. Now pass the unattached end of the cable, through the left shoulder support 81-01, Pic 3. DO NOT stick the sensor to the support at this time.
Place the shoulder support onto the main body and fix it in position with 2 x P-TP screws as indicated in Pic 4.
Fitting the Sensor - My method:
So as not to get your fingers all over the adhesive side of the sensor, peel the backing paper away from both sides of the cable attachment to the half way point approx. Feed the cable attachment into the recess in the support plate and gently press that half into place, Pic 5. Continue to remove the backing paper, pressing the sensor into place as you go, until the whole panel is stuck down, Pic 6.
That`s all for this update, with Pics 7 and 8 showing the final result.
Regards
delboy271155
(Derek)delboy271155 attached the following image(s): COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
|
Rank: Administration Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,450 Points: 24,441 Location: East midlands
|
Hi All,
Time for the ET issue 82 update. Its very much the same as the previous update (left side shoulder), just the other side now (right).
Parts supplied.....Pic 1, you will also need ET on his stand.
Connect the cable 82-03 to the sensor 82-02, Pic 2 and feed the cable through the shoulder bracket 82-01, as shown in Pic 3.
With the cable trailing behind ET, fit the shoulder bracket using 2 x P-TP screws, Pic 4. Remove the backing paper from the sensor and carefully position it on the shoulder as before, Pic 5.
That`s it for this update, Pics 6 and 7. See you soon for Issue 83.
Regards
delboy271155
(Derek)delboy271155 attached the following image(s): COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
