|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,900 Points: 14,846 Location: ipswich
|
STAGE 102:
Rear wing assembly:
Pic 1: Retrieve the assembly 101A/B from the previous stage and locate the wing column 102A.
Pic 2: Fit the column half 102A against the other half 101B.
Pic 3: Fit the wing support hook 102D in place as shown and fix with 1 x VM screw.
Pic 4: Fit the bracket 102B into the slot against the column as shown and fix with 1 x VM screw.
Pic 5: Turn the assembly around and fit the brackets 102B and 102c in the same way.
102C is identified as it has a shorted end to fit into the wing slot.
Fix each part using 1 x VM screw.
Pic 6: Retrieve the main wing assembly from stages 1 and 2 and fit the new parts in place as shown.
Make sure the hook on the wing support is under the main wing.
Fix together with 4 x DP screws.
Pic 7: Shows the assembly from the other side.
Pic 8: Make sure the hook on the wing support is under the main wing and located beside the bracket and fit the nut and bolt FM to fix the parts together.
Pic 9: Fit the wing column up against the two locating brackets on the transmission case and fix using 2 x BM screws.
Pic 10: Shows the rear wing fitted to the car.
Store the model safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
