|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,398 Points: 16,346 Location: ipswich
|
STAGE 21:
Left machine gun 2.
Pic 1: Press-fit the muzzle 21-3 onto the end of the barrel housing 21-4 as shown.
Optional detail:
You can carefully fill in the recesses on the housing with a fine black Sharpie to enhance the look.
This is at the builder’s discretion.
Pic 2: Retrieve the gun assembly from the previous stage and fit the barrel 21-2.
Pic 3: Fit the housing over the barrel as shown.
Pic 4: Press-fit the magazine 21-6 into the side of the gun body noting which way up it goes.
Pic 5: Lift the top cover.
Pic 6: Press-fit the bullet strip 21-5 in place as shown and then close the cover.
Pic 7: Store the assembly and unused part safely.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,398 Points: 16,346 Location: ipswich
|
STAGE 22:
Left disc launcher.
Pic 1: Fit the bracket 22-2 and cover 22-1 together as shown and fix with 1 x ‘G’ screw.
Pic 2: Push-fit the disc holder 22-3 into place as shown.
Pic 3: Locate the disc parts 22-4 and 22-5.
They will press-fit together.
Pic 4: Disc assembled.
Pic 5: Store the parts safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest (2)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
