Welcome Guest Search | Active Topics | Log In | Register

1989 Batmobile Official build STAGES 39 - 44 Options
roymattblack
#1 Posted : 30 June 2026 13:34:10

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,572
Points: 16,868
Location: ipswich
STAGE 39:

Left side exhaust.

Pic 1: Press-fit exhaust parts 39-1 and 39-2 together.

Pic 2: Fix the assembly to part 39-4 with 1 x B screw.

Pic 3: Fix the other half of the pipe 39-3 in place with 1 x D screw.

Pic 4: Fit the plates 39-7 and 39-8 together as shown and fix the exhaust assembly to it using 1 x D screw.

Pic 5: Retrieve the side panel from stage 38 and fix the exhaust assembly in place as shown using 1 x A screw from the other side.

Pic 6: Fit the pipe 39-5 in place as shown and fix from behind with 1 x D screw.

Pic 7: Press-fit the bracket 39-6 in place where indicated.

Store safely for no
w.
roymattblack attached the following image(s):
PARTS 39.JPG
39 (1).JPG
39 (2).JPG
39 (3).JPG
39 (4).JPG
39 (5).JPG
39 (6).JPG
39 (7).JPG
roymattblack
#2 Posted : 02 July 2026 10:45:15

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,572
Points: 16,868
Location: ipswich
STAGE 40:

Left air intake.

Pic 1: Retrieve the previous assembly and fit the pipes 40-6 in place where shown.
Fix from underneath with 2 x E screws.

Pic 2: Press-fit 40-5 firmly in place as shown.

Pic 3: Clip the two hose components 40-3 and 40-4 together.

Pic 4: Fit the assembly to the previously installed part and fix from underneath with 1 x D screw.

Pic 5: Fit the mesh 40-7 into the air intake 40-1.
It will only fit one way.

Pic 6: Press-fit the cover 40-2 in place.

Pic 7: Fit the assembled intake into the side panel as shown and fix with 2 x B screws.

Store safely for now.

roymattblack attached the following image(s):
PARTS 40.JPG
40 (1).JPG
40 (2).JPG
40 (3).JPG
40 (4).JPG
40 (5).JPG
40 (6).JPG
40 (7).JPG
roymattblack
#3 Posted : 03 July 2026 17:00:46

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,572
Points: 16,868
Location: ipswich
STAGE 41:

Right side skirt.

Pic 1: Lay the skirt 41-1 face down and press-fit the parts 41-3 and 41-4 in place as shown.

Pic 2: On the other side, fix the fitting 41-2 in place where indicated using 1 x D screw.

Store safely for now.
roymattblack attached the following image(s):
PARTS 41.JPG
41 (1).JPG
41 (2).JPG
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.120 seconds.
DeAgostini